Aeroflow AF64-2157 Subaru EJ Oil Cooler Delete StudStainless Steel M22

AEROFLOW Subaru EJ Oil Cooler Delete Stud Stainless Steel M22 x 1.5mm Stud - AF64-2157

Regular price$31.24
Pay in 4 interest-free payments of $7.81 with Afterpay
/
  • GST included
  • NZ-owned since 2003
Tax included. Shipping calculated at checkout.
Part No. AF64-2157
  • Delivered NZ-wide
  • Available to order
  • Inventory on the way

  1. OrderedToday
  2. Shipped
  3. Delivered
Visa Mastercard American Express Apple Pay Google Pay Shop Pay Afterpay

The Aeroflow Subaru oil cooler delete stud is designed to remove the original oil cooler unit completely. This will allow the use of a aftermarket oil cooler with a aftermarket sandwich adapter. The oil filter adapter allows the oil filter to screw directly to the cylinder block if you dont wish to run any oil cooler. This kit will require a 2 pipe outlet water pump or a 5/8" silicone block off cap must be purchased to block off the unused water pipe. This stud replaces the OEM Subaru part number 15010AA090. Made from Stainless Steel.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

We provide the best shipping service possible in New Zealand. Every order ships from our Palmerston North warehouse with tracked overnight delivery right to your doorstep.

Cost. Shipping costs are calculated at checkout based on your delivery address — the price you see is the price you pay. No sneaky hidden taxes or surprise import duties.

Delivery time. We aim to have your order with you within a week of placing it.

How we ship. All orders are shipped with DHL direct to our facility, then unpacked and dispatched the same day via a tracked overnight courier service across New Zealand.

Read our full shipping policy →

Every product we sell is genuine Aeroflow Performance stock — backed by Aeroflow's manufacturer warranty and our commitment to making it right.

Authenticity. Genuine Aeroflow Performance Products, sourced direct from Aeroflow Australia. No grey-market, no knock-offs.

Warranty. All Aeroflow products carry the manufacturer's standard warranty. Workmanship and materials are covered against defects from the date of purchase.

NZ Consumer Guarantees Act. You also have statutory rights under the New Zealand Consumer Guarantees Act — these always apply on top of any manufacturer warranty.

Returns. Because we special-order each item directly from Aeroflow Australia to keep prices competitive, we strongly recommend triple-checking that the part is correct for your application before ordering. Returns are accepted only if a product is sent incorrectly or has a warranty issue.

If you're unsure something will fit, just send us a message — we'd much rather help you order the right part first time.

Read our full refund policy →

We accept Visa, Mastercard, Amex, Apple Pay, Google Pay and Shop Pay through Shopify Payments.

You can also pay with Afterpay in 4 interest-free fortnightly payments.

All payments are encrypted and PCI-DSS compliant, so your card details never touch our servers.

The Aeroflow Subaru oil cooler delete stud is designed to remove the original oil cooler unit completely. This will allow the use of a aftermarket oil cooler with a aftermarket sandwich adapter. The oil filter adapter allows the oil filter to screw directly to the cylinder block if you dont wish to run any oil cooler. This kit will require a 2 pipe outlet water pump or a 5/8" silicone block off cap must be purchased to block off the unused water pipe. This stud replaces the OEM Subaru part number 15010AA090. Made from Stainless Steel.

AN size guide

Dash sizes set the bore and the thread on every AN hose and fitting. Check yours against the table before you order.

Full dash size table (-3 to -20) Hide the table
AN/JIC standard dash sizes. Hose inside diameter is nominal.
Dash Hose ID Hose ID (mm) Male thread (UNF)
-3AN 3/16" 4.8 mm 3/8-24
-4AN 1/4" 6.4 mm 7/16-20
-6AN 3/8" 9.5 mm 9/16-18
-8AN 1/2" 12.7 mm 3/4-16
-10AN 5/8" 15.9 mm 7/8-14
-12AN 3/4" 19.1 mm 1-1/16-12
-16AN 1" 25.4 mm 1-5/16-12
-20AN 1-1/4" 31.8 mm 1-5/8-12

Other thread standards

AN, NPT and metric are separate standards. There is no direct size-for-size conversion between them, so match the thread on the port you are screwing into, then pick the adapter that carries that thread on one end and your AN size on the other.

NPT (tapered pipe)

  • 1/8" NPT
  • 1/4" NPT
  • 3/8" NPT
  • 1/2" NPT
  • 3/4" NPT

Metric (straight)

  • M10 x 1.0
  • M12 x 1.5
  • M14 x 1.5
  • M16 x 1.5
  • M18 x 1.5
  • M20 x 1.5
  • M22 x 1.5
Genuine Aeroflow turbocharger, intercooler and wastegate with the Everything Aeroflow logo

Why Everything Aeroflow

Genuine parts. Fair prices. Honest lead times.

Aeroflow makes over 12,000 parts, and we bring every one in from Aeroflow Australia every Tuesday and Friday. Order by 10:30am Tuesday and your part is usually on the courier to you on Thursday. Order by 10:30am Friday and it leaves on Monday. The product page tells you which before you buy.

Buying little and often from Sydney is also why our prices are sharp. There is no bulk-import markup, so when Aeroflow runs a special it goes straight onto the site. Every order is tracked, in NZ dollars with GST included, and it is genuine Aeroflow, never a grey import.

Our story

Recently viewed