Aeroflow AF6079-5002 Hi Rise NON-EFI GM LS Cathedral Port Intake Manifold Base, Natural Cast Finish Suit Modular Intake Manifolds
Aeroflow AF6079-5002 Hi Rise NON-EFI GM LS Cathedral Port Intake Manifold Base, Natural Cast Finish Suit Modular Intake Manifolds (view 2)
Aeroflow AF6079-5002 Hi Rise NON-EFI GM LS Cathedral Port Intake Manifold Base, Natural Cast Finish Suit Modular Intake Manifolds (view 3)
Aeroflow AF6079-5002 Hi Rise NON-EFI GM LS Cathedral Port Intake Manifold Base, Natural Cast Finish Suit Modular Intake Manifolds (view 4)

Aeroflow Hi Rise NON-EFI GM LS Cathedral Port Intake Manifold Base, Natural Cast Finish Suit Modular Intake Manifolds - AF6079-5002

Regular price$1,056.98
Pay in 4 interest-free payments of $264.25 with Afterpay
/
  • GST included
  • NZ-owned since 2003
Tax included. Shipping calculated at checkout.
Part No. AF6079-5002
  • Delivered NZ-wide
  • Available to order
  • Inventory on the way
Visa Mastercard American Express Apple Pay Google Pay Shop Pay Afterpay

The Aeroflow Performance modular intake manifolds allow the end user to customize their intake manifold depending on each individual application. These cast aluminium intake manifold bases perform well and offer extremely good value when paired with our modular top plates (sold separately) to make a complete intake manifold for the very popular GM LS engine family. Alternatively, a custom top plate can be custom made to suit your custom application.

Aeroflow offer either a hi rise manifold base where bonnet modifications will be required. The long runner design allows for high rpm horsepower with big cube engines for a serious drag racer.

The modular design is made up of this bottom base which bolts to the cylinder heads and a top plate (sold separately) which bolts to the base with an O-ring to seal both components. Each base will fit either a cathedral port or rectangle port GM LS cylinder head. With a choice of NON-EFI with no injector bosses or EFI with 12 injector bosses (8 undrilled) complete with fuel rails and cross over, designed to suit 14mm short length (33mm) fuel injectors. All bases have a provision for a LS style map sensor on the rear along with 1 x 3/8” NPT and 1 x 1/8” NPT ports with bungs.

These intake manifold bases are sold separately (as well as in complete intake manifolds and top plates) and can be paired with our modular top plates which are sold separately. Available in either natural cast or black power coated finishes.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

We provide the best shipping service possible in New Zealand. Every order ships from our Palmerston North warehouse with tracked overnight delivery right to your doorstep.

Cost. Shipping costs are calculated at checkout based on your delivery address — the price you see is the price you pay. No sneaky hidden taxes or surprise import duties.

Delivery time. We aim to have your order with you within a week of placing it.

How we ship. All orders are shipped with DHL direct to our facility, then unpacked and dispatched the same day via a tracked overnight courier service across New Zealand.

Read our full shipping policy →

Every product we sell is genuine Aeroflow Performance stock — backed by Aeroflow's manufacturer warranty and our commitment to making it right.

Authenticity. Genuine Aeroflow Performance Products, sourced direct from Aeroflow Australia. No grey-market, no knock-offs.

Warranty. All Aeroflow products carry the manufacturer's standard warranty. Workmanship and materials are covered against defects from the date of purchase.

NZ Consumer Guarantees Act. You also have statutory rights under the New Zealand Consumer Guarantees Act — these always apply on top of any manufacturer warranty.

Returns. Because we special-order each item directly from Aeroflow Australia to keep prices competitive, we strongly recommend triple-checking that the part is correct for your application before ordering. Returns are accepted only if a product is sent incorrectly or has a warranty issue.

If you're unsure something will fit, just send us a message — we'd much rather help you order the right part first time.

Read our full refund policy →

We accept Visa, Mastercard, Amex, Apple Pay, Google Pay and Shop Pay through Shopify Payments.

You can also pay with Afterpay in 4 interest-free fortnightly payments.

All payments are encrypted and PCI-DSS compliant, so your card details never touch our servers.

The Aeroflow Performance modular intake manifolds allow the end user to customize their intake manifold depending on each individual application. These cast aluminium intake manifold bases perform well and offer extremely good value when paired with our modular top plates (sold separately) to make a complete intake manifold for the very popular GM LS engine family. Alternatively, a custom top plate can be custom made to suit your custom application.

Aeroflow offer either a hi rise manifold base where bonnet modifications will be required. The long runner design allows for high rpm horsepower with big cube engines for a serious drag racer.

The modular design is made up of this bottom base which bolts to the cylinder heads and a top plate (sold separately) which bolts to the base with an O-ring to seal both components. Each base will fit either a cathedral port or rectangle port GM LS cylinder head. With a choice of NON-EFI with no injector bosses or EFI with 12 injector bosses (8 undrilled) complete with fuel rails and cross over, designed to suit 14mm short length (33mm) fuel injectors. All bases have a provision for a LS style map sensor on the rear along with 1 x 3/8” NPT and 1 x 1/8” NPT ports with bungs.

These intake manifold bases are sold separately (as well as in complete intake manifolds and top plates) and can be paired with our modular top plates which are sold separately. Available in either natural cast or black power coated finishes.

Genuine Aeroflow turbocharger, intercooler and wastegate with the Everything Aeroflow logo

Why Everything Aeroflow

Genuine parts. Fair prices. Honest lead times.

Aeroflow makes over 12,000 parts, and we bring every one in from Aeroflow Australia every Tuesday and Friday. Order by 10:30am Tuesday and your part is usually on the courier to you on Thursday. Order by 10:30am Friday and it leaves on Monday. The product page tells you which before you buy.

Buying little and often from Sydney is also why our prices are sharp. There is no bulk-import markup, so when Aeroflow runs a special it goes straight onto the site. Every order is tracked, in NZ dollars with GST included, and it is genuine Aeroflow, never a grey import.

Our story

Recently viewed