Aeroflow AF6090-2000 SBF EFI AIR GAP INTAKE MANIFOL
Aeroflow AF6090-2000 SB Ford 289-302 Windsor EFI Air Gap Single Plane Intake Manifold, Natural Cast Finish 2500 - 7500 RPM, Square Bore Carburettor Pad, Non-EGR (view 2)
Aeroflow AF6090-2000 SB Ford 289-302 Windsor EFI Air Gap Single Plane Intake Manifold, Natural Cast Finish 2500 - 7500 RPM, Square Bore Carburettor Pad, Non-EGR (view 3)
Aeroflow AF6090-2000 SB Ford 289-302 Windsor EFI Air Gap Single Plane Intake Manifold, Natural Cast Finish 2500 - 7500 RPM, Square Bore Carburettor Pad, Non-EGR (view 4)

Aeroflow SB Ford 289-302 Windsor EFI Air Gap Single Plane Intake Manifold, Natural Cast Finish 2500 - 7500 RPM, Square Bore Carburettor Pad, Non-EGR - AF6090-2000

Regular price$931.41
Pay in 4 interest-free payments of $232.85 with Afterpay
/
  • GST included
  • NZ-owned since 2003
Tax included. Shipping calculated at checkout.
Part No. AF6090-2000
  • Delivered NZ-wide
  • Low stock - 6 items left
  • Inventory on the way

  1. OrderedToday
  2. Shipped
  3. Delivered
Visa Mastercard American Express Apple Pay Google Pay Shop Pay Afterpay

Get the maximum power from your engine with this Air Gap Small Block Ford Windsor EFI cast intake manifold. This single-plane intake manifold is designed to keep your air and fuel distribution going into the engine at a steady and even flow for maximum performance and efficiency. The carburettor-mounting pad is designed to accept aftermarket 4150 square-bore throttle bodies designed for EFI applications.
The fuel injector bores have back-cut exits in the intake runners for better fuel atomization. The fuel rails, brackets and mounting hardware are included with the manifold for easy installation with the injectors that you choose to use for your combination (fuel injector sold separately). Fuel rail is designed to allow a short length (33mm) 14mm fuel injector (sold separately).
Specifically designed for 289-302 cubic inch small-block Ford Windsor engines operating in the 2500 to 7500 rpm range. In most cases, these manifolds accept factory OE water necks, air conditioning, alternator and H.E.I. ignition systems.

  • Fits Small Block Ford Windsor 289-302 Cubic Inch Engines.
  • Single Plane Configuration.
  • EFI Applications ONLY.
  • Suits 14mm Short Length Injectors (33mm).
  • RPM operating range - 2500 to 7500.
  • Natural Cast Finish.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

We provide the best shipping service possible in New Zealand. Every order ships from our Palmerston North warehouse with tracked overnight delivery right to your doorstep.

Cost. Shipping costs are calculated at checkout based on your delivery address — the price you see is the price you pay. No sneaky hidden taxes or surprise import duties.

Delivery time. We aim to have your order with you within a week of placing it.

How we ship. All orders are shipped with DHL direct to our facility, then unpacked and dispatched the same day via a tracked overnight courier service across New Zealand.

Read our full shipping policy →

Every product we sell is genuine Aeroflow Performance stock — backed by Aeroflow's manufacturer warranty and our commitment to making it right.

Authenticity. Genuine Aeroflow Performance Products, sourced direct from Aeroflow Australia. No grey-market, no knock-offs.

Warranty. All Aeroflow products carry the manufacturer's standard warranty. Workmanship and materials are covered against defects from the date of purchase.

NZ Consumer Guarantees Act. You also have statutory rights under the New Zealand Consumer Guarantees Act — these always apply on top of any manufacturer warranty.

Returns. Because we special-order each item directly from Aeroflow Australia to keep prices competitive, we strongly recommend triple-checking that the part is correct for your application before ordering. Returns are accepted only if a product is sent incorrectly or has a warranty issue.

If you're unsure something will fit, just send us a message — we'd much rather help you order the right part first time.

Read our full refund policy →

We accept Visa, Mastercard, Amex, Apple Pay, Google Pay and Shop Pay through Shopify Payments.

You can also pay with Afterpay in 4 interest-free fortnightly payments.

All payments are encrypted and PCI-DSS compliant, so your card details never touch our servers.

Get the maximum power from your engine with this Air Gap Small Block Ford Windsor EFI cast intake manifold. This single-plane intake manifold is designed to keep your air and fuel distribution going into the engine at a steady and even flow for maximum performance and efficiency. The carburettor-mounting pad is designed to accept aftermarket 4150 square-bore throttle bodies designed for EFI applications.
The fuel injector bores have back-cut exits in the intake runners for better fuel atomization. The fuel rails, brackets and mounting hardware are included with the manifold for easy installation with the injectors that you choose to use for your combination (fuel injector sold separately). Fuel rail is designed to allow a short length (33mm) 14mm fuel injector (sold separately).
Specifically designed for 289-302 cubic inch small-block Ford Windsor engines operating in the 2500 to 7500 rpm range. In most cases, these manifolds accept factory OE water necks, air conditioning, alternator and H.E.I. ignition systems.

  • Fits Small Block Ford Windsor 289-302 Cubic Inch Engines.
  • Single Plane Configuration.
  • EFI Applications ONLY.
  • Suits 14mm Short Length Injectors (33mm).
  • RPM operating range - 2500 to 7500.
  • Natural Cast Finish.

Manifold Specifications
- Square bore carburettor pad
- Overall height (Carb pad to bottom of manifold) is 162mm
- Port Size: 1.04" x 1.82"
- Intake manifold gasket, Fel Pro 1205
- 5/16"-18 carburettor studs (x 4)
- 1/2" NPT port (x 1)
-3/8" NPT ports (x 3)

Intake Manifold Includes
- 12 x 5/16"-18 Hex Screws (50mm UHL)
- 12 x 5/16" Flat Washers and Spring Washers
- 4 x 1/4" carburettor studs

Fuel Rail Kit includes
- 2 x Two Fuel Rails (-8ORB)
- 1 x -8AN cross over 200 series PTFE braided line and two 90 degree non full flow fittings
-3 x -8an to -8ORB fittings
- 1 x -8ORB hex port plug
- 4 x mounting brackets
- 4 x 1/4"-20 socket cap screws (25mm UHL)
- 4 x 1/4"-20 hex head screws (12mm UHL)

Genuine Aeroflow turbocharger, intercooler and wastegate with the Everything Aeroflow logo

Why Everything Aeroflow

Genuine parts. Fair prices. Honest lead times.

Aeroflow makes over 12,000 parts, and we bring every one in from Aeroflow Australia every Tuesday and Friday. Order by 10:30am Tuesday and your part is usually on the courier to you on Thursday. Order by 10:30am Friday and it leaves on Monday. The product page tells you which before you buy.

Buying little and often from Sydney is also why our prices are sharp. There is no bulk-import markup, so when Aeroflow runs a special it goes straight onto the site. Every order is tracked, in NZ dollars with GST included, and it is genuine Aeroflow, never a grey import.

Our story

Recently viewed