{"title":"Engine \/ GM LS2","description":"\u003cp\u003eAeroflow parts for the GM LS2, the 6.0-litre Gen IV V8. The range covers LS2 fuel rails, valley covers, gaskets and seals, and the adapters that tidy up a swap. Every item names the LS2 in its listing, so you are matching parts to the engine rather than guessing.\u003c\/p\u003e\n\u003c!-- EA-RELATED --\u003e\n\u003cp style=\"margin:16px 0 0;font-size:0.95em;color:#444\"\u003e\u003cstrong\u003eRelated:\u003c\/strong\u003e \u003ca href=\"\/pages\/ls-engines\"\u003eShop all GM LS engines\u003c\/a\u003e · \u003ca href=\"\/collections\/engine-gm-ls1\"\u003eGM LS1\u003c\/a\u003e · \u003ca href=\"\/collections\/engine-gm-ls3\"\u003eGM LS3\u003c\/a\u003e · \u003ca href=\"\/collections\/engine-gm-ls6\"\u003eGM LS6\u003c\/a\u003e · \u003ca href=\"\/pages\/shop-by-engine\"\u003eAll engines\u003c\/a\u003e\u003c\/p\u003e\n\u003c!-- \/EA-RELATED --\u003e","products":[{"product_id":"af49-1144","title":"AEROFLOW GM LS1 \u0026 LS2 Hi-Flow Thermostat, 180°F (81°C) 180°F Opening Temperature Rating, Made From Copper\/Steel - AF49-1144","description":"\u003cp\u003eThermostats play a vital role in engine management. Thermostats can fail in 2 possible manners; open or close position. If stuck open, the engine's heater will operate at reduced efficiency for an extended period of time or if stuck shut, will cause your car’s engine to overheat leading to costly repairs or ultimately “complete engine failure”. The Aeroflow Performance range of GM LS thermostats are available in two temperatures that are lower than the factory units. Reducing the temperature which an engine runs will make more power through better thermal and volumetric efficiency. This is a direct drop in with no modifications needed and includes the rubber seal.\u003c\/p\u003e \u003cp\u003eReplacement Rubber Gasket to Suit GM LS1 and LS2 (53.9mm O.D.)\u003c\/p\u003e \u003cp\u003eAF59-1143\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":52065552793901,"sku":"AF49-1144","price":34.63,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/files\/AF49-1144.jpg?v=1779143070"},{"product_id":"af49-1143","title":"AEROFLOW GM LS1 \u0026 LS2 Hi-Flow Thermostat, 160°F (71°C) 160°F Opening Temperature Rating, Made from Copper\/Steel - AF49-1143","description":"\u003cp\u003eThermostats play a vital role in engine management. Thermostats can fail in 2 possible manners; open or close position. If stuck open, the engine's heater will operate at reduced efficiency for an extended period of time or if stuck shut, will cause your car’s engine to overheat leading to costly repairs or ultimately “complete engine failure”. The Aeroflow Performance range of GM LS thermostats are available in two temperatures that are lower than the factory units. Reducing the temperature which an engine runs will make more power through better thermal and volumetric efficiency. This is a direct drop in with no modifications needed and includes the rubber seal.\u003c\/p\u003e \u003cp\u003eReplacement Rubber Gasket to Suit GM LS1 and LS2 (53.9mm O.D.)\u003c\/p\u003e\u003cp\u003eAF59-1143\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":52065552957741,"sku":"AF49-1143","price":29.46,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/files\/AF49-1143.jpg?v=1779143073"},{"product_id":"af59-1143","title":"AEROFLOW Replacement Thermostat O-Ring Gasket 53.9mm O.D Suit GM LS1 \u0026 LS2 - AF59-1143","description":"\u003cp\u003eReplacement rubber thermostat gasket to suit GM LS1 and LS2 thermostat AF49-1143 and AF49-1144.\u003c\/p\u003e \u003cp\u003e53.9mm Outside Diameter rubber O-ring.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":52065553252653,"sku":"AF59-1143","price":2.85,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/files\/AF59-1143.jpg?v=1779143084"},{"product_id":"af64-2092","title":"AEROFLOW Billet Swivel Thermostat Housing - Blue Finish Suits GM LS1 \u0026 LS2. Housing is designed to suit LS2 thermostat. - AF64-2092","description":"\u003cp\u003e\u003cstrong\u003eSuits GM LS1 LS2 LS6 LS7 (Swivel).\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAccepts \u003cstrong\u003eONLY GM LS2\u003c\/strong\u003e Thermostat.\u003c\/p\u003e \u003cp\u003eThe Aeroflow Performance billet thermostat housings area three-piece design that allows for correct positioning of the outlet to suit a large array for applications especially in conversions where small can be an issue. Machined from T6-6061 billet aluminium and allows for a full 360-degree swivel rotation for ease of installation. All Aeroflow Performance thermostat housings feature an O-ring base flange, as opposed to using the factory paper style gasket, this ensured a superior leak free seal. Each thermostat housing outlet can be untreated exposing a female1-1\/4”-20 thread to adapt a AN fitting or a larger barb fitting for custom applications. Available in several anodised finishes.\u003c\/p\u003e\u003cp\u003eReplacement O-ring and bolts - AF59-2092\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":52065554301229,"sku":"AF64-2092","price":167.79,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/files\/AF64-2092.jpg?v=1779143099"},{"product_id":"af64-2092blk","title":"AEROFLOW Billet Swivel Thermostat Housing - Black Finish Suits GM LS1 \u0026 LS2. Housing is designed to suit LS2 thermostat. - AF64-2092BLK","description":"\u003cp\u003e\u003cstrong\u003eSuits GM LS1 LS2 LS6 LS7 (Swivel).\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAccepts \u003cstrong\u003eONLY GM LS2\u003c\/strong\u003e Thermostat.\u003c\/p\u003e \u003cp\u003eThe Aeroflow Performance billet thermostat housings area three-piece design that allows for correct positioning of the outlet to suit a large array for applications especially in conversions where small can be an issue. Machined from T6-6061 billet aluminium and allows for a full 360-degree swivel rotation for ease of installation. All Aeroflow Performance thermostat housings feature an O-ring base flange, as opposed to using the factory paper style gasket, this ensured a superior leak free seal. Each thermostat housing outlet can be untreated exposing a female1-1\/4”-20 thread to adapt a AN fitting or a larger barb fitting for custom applications. Available in several anodised finishes.\u003c\/p\u003e\u003cp\u003eReplacement O-ring and bolts - AF59-2092\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":52065554333997,"sku":"AF64-2092BLK","price":151.82,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/files\/AF64-2092BLK.jpg?v=1779143100"},{"product_id":"af64-2092c","title":"AEROFLOW Billet Swivel Thermostat Housing - Chrome Finish Suits GM LS1 \u0026 LS2. Housing is designed to suit LS2 thermostat. - AF64-2092C","description":"\u003cp\u003e\u003cstrong\u003eSuits GM LS1 LS2 LS6 LS7 (Swivel).\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAccepts \u003cstrong\u003eONLY GM LS2\u003c\/strong\u003e Thermostat.\u003c\/p\u003e \u003cp\u003eThe Aeroflow Performance billet thermostat housings area three-piece design that allows for correct positioning of the outlet to suit a large array for applications especially in conversions where small can be an issue. Machined from T6-6061 billet aluminium and allows for a full 360-degree swivel rotation for ease of installation. All Aeroflow Performance thermostat housings feature an O-ring base flange, as opposed to using the factory paper style gasket, this ensured a superior leak free seal. Each thermostat housing outlet can be untreated exposing a female1-1\/4”-20 thread to adapt a AN fitting or a larger barb fitting for custom applications. Available in several anodised finishes.\u003c\/p\u003e\u003cp\u003eReplacement O-ring and bolts - AF59-2092\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":52065554366765,"sku":"AF64-2092C","price":150.1,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/files\/AF64-2092C.jpg?v=1779143102"},{"product_id":"af64-2092r","title":"AEROFLOW Billet Swivel Thermostat Housing - Red Finish Suits GM LS1 \u0026 LS2. Housing is designed to suit LS2 thermostat. - AF64-2092R","description":"\u003cp\u003e\u003cstrong\u003eSuits GM LS1 LS2 LS6 LS7 (Swivel).\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAccepts \u003cstrong\u003eONLY GM LS2\u003c\/strong\u003e Thermostat.\u003c\/p\u003e \u003cp\u003eThe Aeroflow Performance billet thermostat housings area three-piece design that allows for correct positioning of the outlet to suit a large array for applications especially in conversions where small can be an issue. Machined from T6-6061 billet aluminium and allows for a full 360-degree swivel rotation for ease of installation. All Aeroflow Performance thermostat housings feature an O-ring base flange, as opposed to using the factory paper style gasket, this ensured a superior leak free seal. Each thermostat housing outlet can be untreated exposing a female1-1\/4”-20 thread to adapt a AN fitting or a larger barb fitting for custom applications. Available in several anodised finishes.\u003c\/p\u003e\u003cp\u003eReplacement O-ring and bolts - AF59-2092\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":52065554399533,"sku":"AF64-2092R","price":153.5,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/files\/AF64-2092R.jpg?v=1779143103"},{"product_id":"af64-2092s","title":"AEROFLOW Billet Swivel Thermostat Housing - Silver Finish Suits GM LS1 \u0026 LS2. Housing is designed to suit LS2 thermostat. - AF64-2092S","description":"\u003cp\u003e\u003cstrong\u003eSuits GM LS1 LS2 LS6 LS7 (Swivel).\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAccepts \u003cstrong\u003eONLY GM LS2\u003c\/strong\u003e Thermostat.\u003c\/p\u003e \u003cp\u003eThe Aeroflow Performance billet thermostat housings area three-piece design that allows for correct positioning of the outlet to suit a large array for applications especially in conversions where small can be an issue. Machined from T6-6061 billet aluminium and allows for a full 360-degree swivel rotation for ease of installation. All Aeroflow Performance thermostat housings feature an O-ring base flange, as opposed to using the factory paper style gasket, this ensured a superior leak free seal. Each thermostat housing outlet can be untreated exposing a female1-1\/4”-20 thread to adapt a AN fitting or a larger barb fitting for custom applications. Available in several anodised finishes.\u003c\/p\u003e\u003cp\u003eReplacement O-ring and bolts - AF59-2092\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":52065554432301,"sku":"AF64-2092S","price":149.97,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/files\/AF64-2092S.jpg?v=1779143104"},{"product_id":"af64-2115","title":"AEROFLOW Billet Swivel Thermostat Housing - Blue Finish Suits GM LS3. Housing isdesigned to suit LS2 thermostat. - AF64-2115","description":"\u003cp\u003e\u003cstrong\u003eSuits GM LS3 (Swivel).\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eAccepts \u003cstrong\u003eONLY GM LS2\u003c\/strong\u003e Thermostat.\u003c\/p\u003e \u003cp\u003eThe Aeroflow Performance billet thermostat housings area three-piece design that allows for correct positioning of the outlet to suit a large array for applications especially in conversions where small can be an issue. Machined from T6-6061 billet aluminium and allows for a full 360-degree swivel rotation for ease of installation. All Aeroflow Performance thermostat housings feature an O-ring base flange, as opposed to using the factory paper style gasket, this ensured a superior leak free seal. Each thermostat housing outlet can be untreated exposing a female1-1\/4”-20 thread to adapt a AN fitting or a larger barb fitting for custom applications. Available in several anodised finishes.\u003c\/p\u003e\u003cp\u003eReplacement O-ring and bolts - AF59-2092\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":52065554465069,"sku":"AF64-2115","price":166.28,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/files\/AF64-2115.jpg?v=1779143105"},{"product_id":"af64-2115blk","title":"AEROFLOW Billet Swivel Thermostat Housing - Black Finish Suits GM LS3. Housing isdesigned to suit LS2 thermostat. - AF64-2115BLK","description":"\u003cp\u003e\u003cstrong\u003eSuits GM LS3 (Swivel).\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eAccepts \u003cstrong\u003eONLY GM LS2\u003c\/strong\u003e Thermostat.\u003c\/p\u003e \u003cp\u003eThe Aeroflow Performance billet thermostat housings area three-piece design that allows for correct positioning of the outlet to suit a large array for applications especially in conversions where small can be an issue. Machined from T6-6061 billet aluminium and allows for a full 360-degree swivel rotation for ease of installation. All Aeroflow Performance thermostat housings feature an O-ring base flange, as opposed to using the factory paper style gasket, this ensured a superior leak free seal. Each thermostat housing outlet can be untreated exposing a female1-1\/4”-20 thread to adapt a AN fitting or a larger barb fitting for custom applications. Available in several anodised finishes.\u003c\/p\u003e\u003cp\u003eReplacement O-ring and bolts - AF59-2092\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":52065554497837,"sku":"AF64-2115BLK","price":162.89,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/files\/AF64-2115BLK.jpg?v=1779143106"},{"product_id":"af64-2115c","title":"AEROFLOW Billet Swivel Thermostat Housing - Chrome Finish Suits GM LS3. Housing isdesigned to suit LS2 thermostat. - AF64-2115C","description":"\u003cp\u003e\u003cstrong\u003eSuits GM LS3 (Swivel).\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eAccepts \u003cstrong\u003eONLY GM LS2\u003c\/strong\u003e Thermostat.\u003c\/p\u003e \u003cp\u003eThe Aeroflow Performance billet thermostat housings area three-piece design that allows for correct positioning of the outlet to suit a large array for applications especially in conversions where small can be an issue. Machined from T6-6061 billet aluminium and allows for a full 360-degree swivel rotation for ease of installation. All Aeroflow Performance thermostat housings feature an O-ring base flange, as opposed to using the factory paper style gasket, this ensured a superior leak free seal. Each thermostat housing outlet can be untreated exposing a female1-1\/4”-20 thread to adapt a AN fitting or a larger barb fitting for custom applications. Available in several anodised finishes.\u003c\/p\u003e\u003cp\u003eReplacement O-ring and bolts - AF59-2092\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":52065554530605,"sku":"AF64-2115C","price":199.69,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/files\/AF64-2115C.jpg?v=1779143107"},{"product_id":"af64-2115r","title":"AEROFLOW Billet Swivel Thermostat Housing - Red Finish Suits GM LS3. Housing isdesigned to suit LS2 thermostat. - AF64-2115R","description":"\u003cp\u003e\u003cstrong\u003eSuits GM LS3 (Swivel).\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eAccepts \u003cstrong\u003eONLY GM LS2\u003c\/strong\u003e Thermostat.\u003c\/p\u003e \u003cp\u003eThe Aeroflow Performance billet thermostat housings area three-piece design that allows for correct positioning of the outlet to suit a large array for applications especially in conversions where small can be an issue. Machined from T6-6061 billet aluminium and allows for a full 360-degree swivel rotation for ease of installation. All Aeroflow Performance thermostat housings feature an O-ring base flange, as opposed to using the factory paper style gasket, this ensured a superior leak free seal. Each thermostat housing outlet can be untreated exposing a female1-1\/4”-20 thread to adapt a AN fitting or a larger barb fitting for custom applications. Available in several anodised finishes.\u003c\/p\u003e\u003cp\u003eReplacement O-ring and bolts - AF59-2092\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":52065554563373,"sku":"AF64-2115R","price":181.79,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/files\/AF64-2115R.jpg?v=1779143109"},{"product_id":"af64-2115s","title":"AEROFLOW Billet Swivel Thermostat Housing - Silver Finish Suits GM LS3. Housing isdesigned to suit LS2 thermostat. - AF64-2115S","description":"\u003cp\u003e\u003cstrong\u003eSuits GM LS3 (Swivel).\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eAccepts \u003cstrong\u003eONLY GM LS2\u003c\/strong\u003e Thermostat.\u003c\/p\u003e \u003cp\u003eThe Aeroflow Performance billet thermostat housings area three-piece design that allows for correct positioning of the outlet to suit a large array for applications especially in conversions where small can be an issue. Machined from T6-6061 billet aluminium and allows for a full 360-degree swivel rotation for ease of installation. All Aeroflow Performance thermostat housings feature an O-ring base flange, as opposed to using the factory paper style gasket, this ensured a superior leak free seal. Each thermostat housing outlet can be untreated exposing a female1-1\/4”-20 thread to adapt a AN fitting or a larger barb fitting for custom applications. Available in several anodised finishes.\u003c\/p\u003e\u003cp\u003eReplacement O-ring and bolts - AF59-2092\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":52065554596141,"sku":"AF64-2115S","price":164.73,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/files\/AF64-2115S.jpg?v=1779143110"},{"product_id":"af64-4134","title":"AEROFLOW GM LS2 \/ LS3 \/ LS7 Stainless Steel Coil Relocation Kit This Kit Mounts 8 Coils - AF64-4134","description":"\u003cp\u003eAeroflow have developed a light weight and versatile solution to relocating your GM LS2, LS3 \u0026amp; LS7 style coils. Perfect for conversions or simply running remote GM LS2 style coils (such as AF4020-8265). Coil mounts are designed to run 4 coils mounted side by side in each individual bracket with spacers. Stylish and functional machined from stainless steel brushed finished.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":52065621672237,"sku":"AF64-4134","price":87.14,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/files\/AF64-4134.jpg?v=1779144129"},{"product_id":"af4038-32073c","title":"AEROFLOW XPRO Universal Ignition Lead Set with Ceramic Straight Boots Suit GM LS1, LS2 - AF4038-32073C","description":"\u003cp\u003eAeroflow Performance 8.5mm (21\/64\") universal ceramic spark plug wire sets come with the ceramic lead boots fitted and the other endis open ready to be cut to your preferred length. Distributor cap boots and terminals are supplied for both late model type (HEI male terminals style) and early style (female terminals). Ceramic lead boots have been developed to address the problems associated with burnt spark plug boots. Whether you're running headers with close tolerances, a turbo manifold and dump pipe with very little room in the engine bay for heat shields or you'rejust over melting your spark plug boots from extreme heat. These black ceramic wire boots are the answer! They can withstand temperatures of up to 1090°C (2000°F). Matched with our XPRO ignition lead wire that is 8.5mm spiral wound low resistance with high EMI suppression.\u003c\/p\u003e\u003cp\u003eThe universal GM LS kit suits LS1,LS2 and contains 8 x 14\" length leads with straight ceramic spark plug boots.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":52065624064301,"sku":"AF4038-32073C","price":257.58,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/files\/AF4038-32073C.jpg?v=1779144212"},{"product_id":"af4038-32813c","title":"AEROFLOW XPRO LS 8\" Ignition Lead Set with Ceramic 135 Degree Boots Suit GM LS1, LS2 - AF4038-32813C","description":"\u003cp\u003eAeroflow Performance 8.5mm (21\/64\") direct fit GM LSceramic spark plug wire sets feature a 135-degree ceramic boot on one end and a 45-degree LS coil boot pre crimped. Ceramic lead boots have been developed to address the problems associated with burnt spark plug boots. Whether you're running headers with close tolerances, a turbo manifold and dump pipe with very little room in the engine bay for heat shields or you'rejust over melting your spark plug boots from extreme heat. These black ceramic wire boots are the answer! They can withstand temperatures of up to 1090°C (2000°F). Matched with our XPRO ignition lead wire that is 8.5mm spiral wound low resistance with high EMI suppression.\u003c\/p\u003e\u003cp\u003e This kit contains 8 x 8\" (203mm) length leads to suit various LS coils with 45° silicone coil boots and 135° ceramic spark plug boots.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":52065624162605,"sku":"AF4038-32813C","price":295.16,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/files\/AF4038-32813C.jpg?v=1779144215"},{"product_id":"af4038-32823c","title":"AEROFLOW XPRO LS 12\" Ignition Lead Set with Ceramic 135 Degree Boots Suit GM LS1, LS2 - AF4038-32823C","description":"\u003cp\u003eAeroflow Performance 8.5mm (21\/64\") direct fit GM LSceramic spark plug wire sets feature a 135-degree ceramic boot on one end and a 45-degree LS coil boot pre crimped. Ceramic lead boots have been developed to address the problems associated with burnt spark plug boots. Whether you're running headers with close tolerances, a turbo manifold and dump pipe with very little room in the engine bay for heat shields or you'rejust over melting your spark plug boots from extreme heat. These black ceramic wire boots are the answer! They can withstand temperatures of up to 1090°C (2000°F). Matched with our XPRO ignition lead wire that is 8.5mm spiral wound low resistance with high EMI suppression.\u003c\/p\u003e\u003cp\u003e This kit contains 8 x 12\" (305mm) length leads to suit various LS coils with 45° silicone coil boots and 135° ceramic spark plug boots.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":52065624195373,"sku":"AF4038-32823C","price":301.49,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/files\/AF4038-32823C.jpg?v=1779144217"},{"product_id":"af4030-32823","title":"AEROFLOW Xpro Black 8.5mm Spark Plug Wire Sets Fits GM LS2\/LS3 engines,12\" length - AF4030-32823","description":"\u003cul\u003e\n\u003cli\u003e8.5mm diameter\u003c\/li\u003e \u003cli\u003eSpiral Wound Copper conductor\u003c\/li\u003e\n\u003cli\u003eHigh EMI Suppression\u003c\/li\u003e\n\u003cli\u003eLow Resistance (40-50 ohms per foot)\u003c\/li\u003e\n\u003cli\u003eHi Temperature Durable Silicone Sleeves and Boots\u003c\/li\u003e\n\u003cli\u003eAvailable in Red or Black outer cover.\u003c\/li\u003e \u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":52065624555821,"sku":"AF4030-32823","price":81.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/files\/AF4030-32823.jpg?v=1779144230"},{"product_id":"af4530-32829","title":"AEROFLOW Xpro Red 8.5mm Spark Plug Wire Sets Fits GM LS2\/LS3 engines, 12\" length - AF4530-32829","description":"\u003cul\u003e\n\u003cli\u003e8.5mm diameter\u003c\/li\u003e \u003cli\u003eSpiral Wound Copper conductor\u003c\/li\u003e\n\u003cli\u003eHigh EMI Suppression\u003c\/li\u003e\n\u003cli\u003eLow Resistance (40-50 ohms per foot)\u003c\/li\u003e\n\u003cli\u003eHi Temperature Durable Silicone Sleeves and Boots\u003c\/li\u003e\n\u003cli\u003eAvailable in Red or Black outer cover.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e            \u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":52065624621357,"sku":"AF4530-32829","price":83.23,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/files\/AF4530-32829.jpg?v=1779144232"},{"product_id":"af49-1559","title":"AEROFLOW 2.7 bar Bosch Map Sensor Suit GM LS2\/LS3 - AF49-1559","description":"\u003cp\u003eThis genuine Bosch GM LS3 Manifold Absolute Pressure (MAP) sensor is designed to direct fit into VE\/VF Holden Commodore \u0026amp; HSV LS2 LS3 engines. This sensor is used to determine engine load on forced induction engines. Thissensor is a popular upgrade intended to be used on engines producing positive manifold pressure up to 1.9 BAR, or roughly 28psi of boost. This sensor is fully calibrated for high accuracy and designed for high stability across the temperature range. This sensor can also be used for universal applications that also requirea map sensor up to 1.9 BAR.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":52065625571629,"sku":"AF49-1559","price":90.35,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/files\/AF49-1559.jpg?v=1779144267"},{"product_id":"af49-1534","title":"AEROFLOW Coil Sub Harness, OEM Replacment Suit LS2 Coils, 1-Side Only - AF49-1534","description":"\u003cp\u003eAeroflow Performance EFI LS2 Coil Sub Harness. This coil sub harness is intended to be used with factory LS2 coils with the factory GM Coil-on-plug connectors. Sold Individually (AF49-1535).\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":52065626390829,"sku":"AF49-1534","price":40.28,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/files\/AF49-1534.jpg?v=1779144294"},{"product_id":"af49-1535","title":"AEROFLOW Coil Plug Harness Suit LS2 Coils (4-Pack) - AF49-1535","description":"\u003cp\u003eThese Aeroflow Performance 4 pin ignition coil pack automotive plugs are used with GM series LS2 engines or when you wish to convert over to the later model coil packs on any conversions. The set of 4 pre-terminated coil plug looms allow easy installation on current wiring without the need to crimp. Perfect for those that are replacing worn damaged connectors or for those creating a new loom due to relocating coils.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003e Extra pins supplied for custom looms.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":52065626456365,"sku":"AF49-1535","price":39.15,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/files\/AF49-1535.jpg?v=1779144296"},{"product_id":"af49-1506","title":"AEROFLOW GM LS2 \/ LS3 with T56 Manual Transmission Wiring Harness Standalone Plug and Play Complete Engine Harness - AF49-1506","description":"\u003cp\u003eThe Aeroflow Performance GM LS complete standalone replacement wiring harness. These harnesses are designed for retrofitting LS series engines and both manual T56\/TR6060 transmissions and non electronic automatic transmissions into older muscle cars and street rods or newer non-emissions controlled vehicles.\u003c\/p\u003e\u003cp\u003eThey are completely plug and play with four wire hook-up (switched power, constant power and ground connections required) .These are built with New GM Delphi connector and high temperature wires. Harnesses are designed with a sliding grommet seal and 4 - 5 feet of length from the rear of the cylinder head to the PCM mounting position under the vehicle dashboard.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":52065628160301,"sku":"AF49-1506","price":1875.77,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/files\/AF49-1506.jpg?v=1779144359"},{"product_id":"af77-5027blk","title":"AEROFLOW GM LS Trussed Valley Plate, Black Finish Suit GM LS2, LS3, LSX Series - AF77-5027BLK","description":"\u003cp\u003eAeroflow Performance cast aluminium LS3 valley plate is perfect for those that have been converted from EFI to Carburetted applications. This valley plate does not feature any provision for the knock sensor which become no longer necessary when switching to a carburettor application or when moving to a dual knock sensor setup on EFI applications. These valley plates are machined smooth on the underside, allowing for the elimination of Displacement-On- Demand (DOD) or Active Fuel Management (AFM). THESE MUST be blocked off when using this valley plate (delete plugs sold separately AF3000-1099). Designed to be low profile that will eliminate any fitment issues with factory and aftermarket intakes and still take the factory gasket which is included in this kit. They can be used on factory and aftermarket GM LS3 style engine blocks. These valley plates do not feature the factory oil pressure sensor hole and MUST be modified and drilled out to accept this factory sensor. Each valley plate includes a new gasket and new mounting bolts.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":52065635762477,"sku":"AF77-5027BLK","price":206.92,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/files\/AF77-5027BLK.jpg?v=1779144592"},{"product_id":"af77-5027","title":"AEROFLOW GM LS Trussed Valley Plate, Natural Cast Finish Suit GM LS2, LS3, LSX Series - AF77-5027","description":"\u003cp\u003eAeroflow Performance cast aluminium LS3 valley plate is perfect for those that have been converted from EFI to Carburetted applications. This valley plate does not feature any provision for the knock sensor which become no longer necessary when switching to a carburettor application or when moving to a dual knock sensor setup on EFI applications. These valley plates are machined smooth on the underside, allowing for the elimination of Displacement-On- Demand (DOD) or Active Fuel Management (AFM). THESE MUST be blocked off when using this valley plate (delete plugs sold separately AF3000-1099). Designed to be low profile that will eliminate any fitment issues with factory and aftermarket intakes and still take the factory gasket which is included in this kit. They can be used on factory and aftermarket GM LS3 style engine blocks. These valley plates do not feature the factory oil pressure sensor hole and MUST be modified and drilled out to accept this factory sensor. Each valley plate includes a new gasket and new mounting bolts.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":52065635828013,"sku":"AF77-5027","price":203.82,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/files\/AF77-5027.jpg?v=1779144595"},{"product_id":"af77-5028blk","title":"AEROFLOW GM LS Finned Valley Plate, Black Finish Suit GM LS2, LS3, LSX Series - AF77-5028BLK","description":"\u003cp\u003eAeroflow Performance cast aluminium LS3 valley plate is perfect for those that have been converted from EFI to Carburetted applications. This valley plate does not feature any provision for the knock sensor which become no longer necessary when switching to a carburettor application or when moving to a dual knock sensor setup on EFI applications. These valley plates are machined smooth on the underside, allowing for the elimination of Displacement-On- Demand (DOD) or Active Fuel Management (AFM). THESE MUST be blocked off when using this valley plate (delete plugs sold separately AF3000-1099). Designed to be low profile that will eliminate any fitment issues with factory and aftermarket intakes and still take the factory gasket which is included in this kit. They can be used on factory and aftermarket GM LS3 style engine blocks. These valley plates do not feature the factory oil pressure sensor hole and MUST be modified and drilled out to accept this factory sensor. Each valley plate includes a new gasket and new mounting bolts.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":52065635860781,"sku":"AF77-5028BLK","price":107.55,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/files\/AF77-5028BLK.jpg?v=1779144596"},{"product_id":"af77-5028","title":"AEROFLOW GM LS Finned Valley Plate, Natural Cast Finish Suit GM LS2, LS3, LSX Series - AF77-5028","description":"\u003cp\u003eAeroflow Performance cast aluminium LS3 valley plate is perfect for those that have been converted from EFI to Carburetted applications. This valley plate does not feature any provision for the knock sensor which become no longer necessary when switching to a carburettor application or when moving to a dual knock sensor setup on EFI applications. These valley plates are machined smooth on the underside, allowing for the elimination of Displacement-On- Demand (DOD) or Active Fuel Management (AFM). THESE MUST be blocked off when using this valley plate (delete plugs sold separately AF3000-1099). Designed to be low profile that will eliminate any fitment issues with factory and aftermarket intakes and still take the factory gasket which is included in this kit. They can be used on factory and aftermarket GM LS3 style engine blocks. These valley plates do not feature the factory oil pressure sensor hole and MUST be modified and drilled out to accept this factory sensor. Each valley plate includes a new gasket and new mounting bolts.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":52065635926317,"sku":"AF77-5028","price":90.92,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/files\/AF77-5028.jpg?v=1779144598"},{"product_id":"af59-5016","title":"AEROFLOW GM LS DOD Delete O-Ring Kit Suit GM LS2 \u0026 LS3 Valley Plates - AF59-5016","description":"\u003cp\u003eWhen looking to do a DOD delete on your GM LS2\/LS3, you will require the factory O-rings to seal the valley plate. These are the O rings that go under your valley plate and block the oil galleries that would normally feed the displacement on demand solenoids. They work with both factory and aftermarket valley plate covers. These are manufactured to be a direct replacement for part number AC Delco 12610160. They are sold in a pack of 8 O-rings to suit each engine.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":52065635991853,"sku":"AF59-5016","price":38.46,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/files\/AF59-5016.jpg?v=1779144601"},{"product_id":"af1850-1000-ls2","title":"AEROFLOW Full Gasket Set Suit GM LS with Rectangle Port Cylinder Heads - AF1850-1000-LS2","description":"\u003cp\u003eLet Aeroflow Performance supply the very best in engine gaskets for your engine rebuild. These high calibre full gasket kits include all the necessary gaskets and seals needed for a complete rebuild, all in one convenient and affordable package. Each gasket application is constructed from a range of high-quality cork, rubber, graphite or steel materials depending on each kit to provide a tight seal against leaks. Keep your engine leak-free and running at peak efficiency by replacing worn or blown out gaskets with this range of full gasket kits.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":52065639465261,"sku":"AF1850-1000-LS2","price":720.85,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/files\/AF1850-1000-LS2_10122025213929.jpg?v=1779144705"},{"product_id":"af1852-1000-ls2","title":"AEROFLOW Top End Gasket Set Suit GM LS with Rectangle Port Cylinder Heads - AF1852-1000-LS2","description":"\u003cp\u003eLet Aeroflow Performance supply the very best in engine gaskets for your engine rebuild. These high calibre top end kits include all the necessary gaskets and seals needed to service the top half of the engine including cylinder heads. Essentially everything above the engine block is all in one convenient and affordable package. Each gasket application is constructed from a range of high-quality cork, rubber, graphite or steel materials depending on each kit to provide a tight seal against leaks. Keep your engine leak-free and running at peak efficiency by replacing worn or blown out gaskets with this range of full gasket kits.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":52065639498029,"sku":"AF1852-1000-LS2","price":486.06,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/files\/AF1852-1000-LS2_10122025213929.jpg?v=1779144706"},{"product_id":"af6233-5002","title":"AEROFLOW GM LS Cathedral Intake O-Ring Gasket Set Suit LS1, LS2 engines, 8 Piece Set - AF6233-5002","description":"\u003cp\u003eThese replacement intake O-ring gaskets are specifically designed to suit our GM LS sheet metal fabricated intake manifolds. These are included in the intake manifold kit AF6233-5000 intake manifolds.  The 8-piece O-ring kit will also suit all GM LS intakes with cathedral port o-ring gaskets.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":52065645134125,"sku":"AF6233-5002","price":26.49,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/files\/AF6233-5002.jpg?v=1779144796"},{"product_id":"af1850-1022","title":"AEROFLOW GM LS2 Valley Plate Gasket Suits GM LS2, LS3, LS7, LSX - AF1850-1022","description":"\u003cp\u003e\u003cstrong\u003eAeroflow Performance GM Valley Plate Gasket.\u003c\/strong\u003e \u003cbr\u003eLet Aeroflow Performance supply the very best in engine gaskets for your GM LS build. This valley plate gasket is great when rebuilding an engine or your valley plate is leaking in your GM LS engines. Keep your engine leak-free and running at peak efficiency by replacing worn or blown out gaskets.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":52065646543149,"sku":"AF1850-1022","price":17.66,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/files\/AF1850-1022_03072025070859.jpg?v=1779144850"},{"product_id":"af64-2161blk","title":"AEROFLOW Billet GM LS2 Timing Pointer Suits 6.75\" and 7.50\" Harmonic Balancer, Black Finish - AF64-2161BLK","description":"\u003cp\u003eAeroflow timing pointers make quick and easy work of adding a timing pointer to your LS2 series engine. Timingpointers play a crucial role to verify timing prior to tuning giving valuable info for a tuner or when starting your engine up on a new build. These direct fit billet CNC-machined LS timing pointers are adjustable with brackets to suit both a 6.75\" and 7.5\" diameter harmonic balancers. These LS timing pointers are positioned in such a way to clear engine accessories and allow optimal viewing spot for setting timing in or out of the car. The timing point features a slotted adjustment to precisely dial in your timing. Designed to specifically fit LS2 belt lines finished in either black or silver anodised options.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":52065652998445,"sku":"AF64-2161BLK","price":68.83,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/files\/AF64-2161BLK.jpg?v=1779145015"},{"product_id":"af64-2161s","title":"AEROFLOW Billet GM LS2 Timing Pointer Suits 6.75\" and 7.50\" Harmonic Balancer, Silver Finish - AF64-2161S","description":"\u003cp\u003eAeroflow timing pointers make quick and easy work of adding a timing pointer to your LS2 series engine. Timingpointers play a crucial role to verify timing prior to tuning giving valuable info for a tuner or when starting your engine up on a new build. These direct fit billet CNC-machined LS timing pointers are adjustable with brackets to suit both a 6.75\" and 7.5\" diameter harmonic balancers. These LS timing pointers are positioned in such a way to clear engine accessories and allow optimal viewing spot for setting timing in or out of the car. The timing point features a slotted adjustment to precisely dial in your timing. Designed to specifically fit LS2 belt lines finished in either black or silver anodised options.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":52065653031213,"sku":"AF64-2161S","price":69.04,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/files\/AF64-2161S.jpg?v=1779145016"},{"product_id":"af64-2155","title":"AEROFLOW GM LS1 LS2 LS3 Billet EFI Fuel Rails (Blue) Suit 14mm Short and 3\/4\" Length Fuel Injectors, -8ORB Ports - AF64-2155","description":"\u003cdiv class=\"product attribute description\"\u003e\n        \u003cdiv class=\"value description\"\u003e\n                    \u003cp\u003eGive your GM LS engine the compatibility to flow some serious flow to feed even the most fuel hungry applications. These GM LS fuel rails from Aeroflow Performance feature specifically designed billet modular mounts. These modular mounts can easily be flipped and reinstalled into different threaded holes on the fuel rail itself allowing it to suit GM LS1, LS2, LS3, LS6, L76 and L99 engines.\u003cbr\u003eEachfuel rail is precision CNC machined from extruded 6063 aluminium with a large internal diameter bore with -8ORB ports on each end, as well as one in the middle of each rail for sensors or an extra feed\/return.\u003cbr\u003eLike the OEM fuel rails, the injector bores are 14mm ID so factory injectors are permitted. This kit is compatible with all fuel types including popular alcohol mixtures such as E85.\u003cbr\u003eAeroflow fuel rails are double anodised and are available in Blue, Black, Red and Silver finishes.\u003c\/p\u003e            \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":52065748943149,"sku":"AF64-2155","price":380.46,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/files\/AF64-2155.jpg?v=1779148642"},{"product_id":"af64-2155blk","title":"AEROFLOW GM LS1 LS2 LS3 Billet EFI Fuel Rails (Black) Suit 14mm Short and 3\/4\" Length Fuel Injectors, -8ORB Ports - AF64-2155BLK","description":"\u003cdiv class=\"product attribute description\"\u003e\n        \u003cdiv class=\"value description\"\u003e\n                    \u003cp\u003eGive your GM LS engine the compatibility to flow some serious flow to feed even the most fuel hungry applications. These GM LS fuel rails from Aeroflow Performance feature specifically designed billet modular mounts. These modular mounts can easily be flipped and reinstalled into different threaded holes on the fuel rail itself allowing it to suit GM LS1, LS2, LS3, LS6, L76 and L99 engines.\u003cbr\u003eEachfuel rail is precision CNC machined from extruded 6063 aluminium with a large internal diameter bore with -8ORB ports on each end, as well as one in the middle of each rail for sensors or an extra feed\/return.\u003cbr\u003eLike the OEM fuel rails, the injector bores are 14mm ID so factory injectors are permitted. This kit is compatible with all fuel types including popular alcohol mixtures such as E85.\u003cbr\u003eAeroflow fuel rails are double anodised and are available in Blue, Black, Red and Silver finishes.\u003c\/p\u003e            \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":52065748975917,"sku":"AF64-2155BLK","price":369.15,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/files\/AF64-2155BLK.jpg?v=1779148642"},{"product_id":"af64-2155r","title":"AEROFLOW GM LS1 LS2 LS3 Billet EFI Fuel Rails (Red) Suit 14mm Short and 3\/4\" Length Fuel Injectors, -8ORB Ports - AF64-2155R","description":"\u003cdiv class=\"product attribute description\"\u003e\n        \u003cdiv class=\"value description\"\u003e\n                    \u003cp\u003eGive your GM LS engine the compatibility to flow some serious flow to feed even the most fuel hungry applications. These GM LS fuel rails from Aeroflow Performance feature specifically designed billet modular mounts. These modular mounts can easily be flipped and reinstalled into different threaded holes on the fuel rail itself allowing it to suit GM LS1, LS2, LS3, LS6, L76 and L99 engines.\u003cbr\u003eEachfuel rail is precision CNC machined from extruded 6063 aluminium with a large internal diameter bore with -8ORB ports on each end, as well as one in the middle of each rail for sensors or an extra feed\/return.\u003cbr\u003eLike the OEM fuel rails, the injector bores are 14mm ID so factory injectors are permitted. This kit is compatible with all fuel types including popular alcohol mixtures such as E85.\u003cbr\u003eAeroflow fuel rails are double anodised and are available in Blue, Black, Red and Silver finishes.\u003c\/p\u003e            \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":52065749008685,"sku":"AF64-2155R","price":401.88,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/files\/AF64-2155R.jpg?v=1779148644"},{"product_id":"af64-2155s","title":"AEROFLOW GM LS1 LS2 LS3 Billet EFI Fuel Rails (Silver) Suit 14mm Short and 3\/4\" Length Fuel Injectors, -8ORB Ports - AF64-2155S","description":"\u003cdiv class=\"product attribute description\"\u003e\n        \u003cdiv class=\"value description\"\u003e\n                    \u003cp\u003eGive your GM LS engine the compatibility to flow some serious flow to feed even the most fuel hungry applications. These GM LS fuel rails from Aeroflow Performance feature specifically designed billet modular mounts. These modular mounts can easily be flipped and reinstalled into different threaded holes on the fuel rail itself allowing it to suit GM LS1, LS2, LS3, LS6, L76 and L99 engines.\u003cbr\u003eEachfuel rail is precision CNC machined from extruded 6063 aluminium with a large internal diameter bore with -8ORB ports on each end, as well as one in the middle of each rail for sensors or an extra feed\/return.\u003cbr\u003eLike the OEM fuel rails, the injector bores are 14mm ID so factory injectors are permitted. This kit is compatible with all fuel types including popular alcohol mixtures such as E85.\u003cbr\u003eAeroflow fuel rails are double anodised and are available in Blue, Black, Red and Silver finishes.\u003c\/p\u003e            \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":52065749041453,"sku":"AF64-2155S","price":390.56,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/files\/AF64-2155S.jpg?v=1779148646"},{"product_id":"af64-2006","title":"AEROFLOW GM LS2, LS3 Billet EFI Fuel Rails - Blue Suit 14mm Short Length Fuel Injectors, -8ORB Ports - AF64-2006","description":"\u003cdiv class=\"product attribute description\"\u003e\n        \u003cdiv class=\"value description\"\u003e\n                    \u003cp\u003eAeroflow's Billet EFI Fuel rails feature precision machining with heavy duty mounts for high pressure applications. Aeroflow fuel rails are threaded with a -8AN ORB port and have a 16.1mm \/ 41\/64\" size bore. Aeroflow fuel rails are double anodised and are available in Blue, Black, Red and polished finishes.\u003c\/p\u003e            \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":52065751040301,"sku":"AF64-2006","price":222.15,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/files\/AF64-2006.jpg?v=1779148724"},{"product_id":"af6233-5000","title":"Aeroflow GM LS1\/LS2 Sheet Metal Intake Manifold with Fuel Rail and Mounting Kit Suit 102mm Throttle Bodies and Cathedral Port Cylinder Heads - AF6233-5000","description":"\u003cdiv class=\"product attribute description\"\u003e\u003cdiv class=\"value description\"\u003e\n\u003cp\u003eThe Aeroflow Performance sheet metal fabricated intake manifolds perform well and offer an extremely good value for a performance intake manifold for the very popular GM LS engine family. This low profile and compact design were developed to allow the end user to fit under a stock bonnet. Short intake runners with tapered top are designed to increase air velocity and more evenly distribute airflow to all 8 cylinders improving performance and throttle response. We use thick 3mm (1\/8\") T6061 sheet aluminium for the intake plenum for maximum rigidity, so you will not have any issues with the intake manifold distorting under boost or warping during installation.\u003c\/p\u003e\n\u003cp\u003eThis LS intake manifold suits LS1\/LS2 cathedral port heads. Powder coated black creates stealthy engine bay styling.\u003c\/p\u003e\n\u003cp\u003eEach manifold is ready to bolt on out of the box and are designed to accept 102mm throttle bodies and include high flow fuel rail kit, all gaskets and hardware for a hassle-free installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":52197777506605,"sku":"AF6233-5000","price":923.6,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/files\/AF6233-5000.jpg?v=1782986153"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3269\/6365\/collections\/engine-gm-ls2.jpg?v=1791878808","url":"https:\/\/everythingaeroflow.co.nz\/collections\/engine-gm-ls2.oembed","provider":"Everything Aeroflow","version":"1.0","type":"link"}